manualshive.com logo in svg

LevelOne FPS-1032, User Manual, Page: 33 / 81

Share
Download
LevelOne FPS-1032 User Manual Download Page 33

 

                                                                                            33 

 

 

 

Print Server Name: 

This option allows you to view device name of the print server. To 

correct the print server’s device name. 

System Contact: 

This option allows you to view contact name of the print server. To check 

the print server’s contact name who in charge of this device. 

System Location: 

This option allows you to view Location name of the print server. To 

confirm the print server’s location name where the print server is located 
in the office’s LAN. 

System Up Time: 

This option allows you to view uptime of the print server. When you start 

the print server, it will compute the print server from start time to power off 
time. 

Firmware Version: 

This option allows you to view firmware version of the print server. To 

verify the print server’s firmware version is newer in this time.

 

MAC Address: 

This option allows you to view Node ID of the print server. The Node ID is 

unique from any print server. 

Email Alert: 

This option allows you to view the status of Email Alert feature. 

Print Jobs: 

This option allows you to view all the print jobs sent by any network user. 

 

 

Summary of Contents for FPS-1032


















































































Reviews:

No comments