LevelOne DSS-1000 User Manual Download Page 91

Page: 91 / 134

DSS-1000 User Manual



Logout

: Click to logout from DSS-1000 but continue using Internet Explorer.





Quit

: Click to quit the entire session and close Internet Explorer.



Camera List Menu

The

Camera List

menu defines how the cameras are listed on the left panel.



List

: Click to list the cameras by channel ID and name only.



Detail

: Click to list the cameras with details such as IP address and camera model.

When the mouse goes over to the camera list panel, the scroll bars appear to enable

users to scroll through the camera details.



Hide Toolbar

Click

Hide Toolbar

to hide the toolbar from the

Live View

screen. Press the

<ESC>

key

to display the toolbar again.

Help

Click

Help

to access the website for more product information and documentation.

About

Click

About

to display the firmware version.

System Date and Time

Click the date and time to access the

Date and Time

setup page. See

Date and Time

page 93.

Summary of Contents for DSS-1000







































































































































Search results

Summary of Contents for DSS-1000

Reviews:

Related manuals for DSS-1000

Brands by name

Popular brands

LevelOne DSS-1000, User Manual

Search results

Summary of Contents for DSS-1000

Reviews:

Related manuals for DSS-1000

Brands by name

Popular brands