Reflectors
Leuze electronic GmbH + Co. KG
AMS 307
i
29
TNT
35/7-2
4V
6.2.4
Technical data of heated reflectors
The reflective tape is affixed to a heated, thermally insulated carrier. The insulation results
in a very high energetic efficiency.
Only the reflective tape is kept at the specified temperature by the integrated heater. The
insulation on the back prevents the generated heat from being dissipated via the steel
construction. Energy costs are greatly reduced in the case of continuous heating.
Article
Type designation
Reflective tape
200x200-H
Reflective tape
500x500-H
Reflective tape
914x914-H
Part no.
50115020
50115021
50115022
Voltage supply
230VAC
Power
100W
600W
1800W
Current consumption
~ 0.5A
~ 3A
~ 8A
Length of supply line
2 m
Size of reflective tape
200 x 200mm
500 x 500mm
914 x 914mm
Outer dimensions of base
material
250 x 250mm
550 x 550mm
964 x 964mm
Weight
0.5kg
2.5kg
12kg
Temperature control
Controlled heating with the following switch-on and switch-off
temperatures, measured at the reflector surface.
Switch-on temperature
~ 5°C
Switch-off temperature
~ 20°C
Operating temperature
-30°C … +70°C
Storage temperature
-40°C … +80°C
Air humidity
Max. 90%, non-condensing
Cleaning
Do not use any abrasive agents. A conventional household
detergent can be used as a cleaning agent. Rinse with clear
water and dry the surface.
Reflector storage
Store in a cool and dry place.
