Fast commissioning / operating principle
12
AMS 307
i
Leuze electronic GmbH + Co. KG
3.2
Connecting the voltage supply
The laser measurement system is connected using M12 connectors. The voltage supply is
connected via the PWR M12 connection.
Detailed information can be found in Chapter 7.
3.3
Display
Once the laser measurement system is supplied with voltage, the device status as well as
the measured position values can be read on the display. The display automatically switches
to the display of the measurement values.
Use the up/down buttons
to the left of the display to read and change a wide range
of data and parameters.
Detailed information can be found in Chapter 8.
3.4
SSI interface
For correct data exchange between frequency inverter and AMS 307
i
, both devices must
have the same settings for the following parameters.
• Encoding
• Number of data bits
• Resolution
• Error bit on/off
For further information, see also Chapter 9 "SSI interface" on page 52 and display menu
structure level 2, menu item "SSI" in the appendix of the manual.
