Fast commissioning / operating principle
Leuze electronic GmbH + Co. KG
BCL 308
i
17
Via webConfig:
Configuration > Communication > Ethernet interface
3.4.2 Automatically setting the IP address
If your system includes a DHCP server that is to be used to assign the IP addresses, proceed as follows:
Activate the DHCP client mode in the BCL 308
i
.
Via webConfig:
Configuration > Communication > Ethernet interface
Activate the
DHCP
= ON setting there.
NOTE
If the setting is performed via the webConfig tool, the BCL 308
i
must be restarted. The set IP
address is only accepted and active after this restart.
