Electrical connection
Leuze electronic GmbH + Co. KG
BCL 308
i
59
7
Electrical connection
The bar code readers of the BCL 300
i
series feature a modular connection concept with interchangeable
connection hoods.
The additional Mini-B type USB interface is used for configuring the device.
Location of the electrical connections
Figure 7.1: Location of the electrical connections
7.1
Safety notices for the electrical connection
NOTE
On delivery, the products are provided with a plastic protective cap on the side of the system plug
or the system socket.
Additional connection accessories can be found in Chapter 13.
ATTENTION!
The BCL 308
i
does not fulfill degree of protection IP 65 until the connection hood has been
screwed on. Minimum tightening torque of the housing connecting screw of the connection hood
is 1.4 Nm!
Line scanner
MK 308
MS 308
M12 connector
Terminals
Line scanner
with deflecting mirror
Oscillating-mirror scanner
or
or
ME 308
Connection cables
ATTENTION!
Do not open the device yourself under any circumstances! There is otherwise a risk of uncon
-
trolled emission of laser radiation from the device. The housing of the BCL 308
i
contains no parts
that need to be adjusted or maintained by the user.
Before connecting the device, be sure that the supply voltage agrees with the value printed on
the name plate.
Connection of the device and cleaning must only be carried out by a qualified electrician.
Ensure that the functional earth (FE) is connected correctly. Unimpaired operation is only guar
-
anteed when the functional earth is connected properly.
If faults cannot be cleared, the device should be switched off and protected against accidental
use.
