Online commands
Leuze electronic GmbH + Co. KG
BCL 308
i
95
11.1.2 Online commands for system control
Activating sensor input
Deactivating sensor input
11.1.3 Online commands for configuring the switching inputs/outputs
Activate switching output
Command
’+’
Description
The command activates decoding. This command is used to activate the reading gate. It
remains active until it is deactivated by one of the following criteria:
• Deactivation by a manual command
• Deactivation by a switching input
• Deactivation upon reaching the specified read quality (equal scans)
• Deactivation by timeout
• Deactivation upon reaching a preset number of scans without information.
Parameter
No
Acknowledg
-
ment
None
Command
’-’
Description
The command activates decoding. This command can be used to deactivate the read
-
ing gate. Following deactivation, the read result is output. Because the reading gate was
manually deactivated and, thus, no GoodRead criterion was met, a NoRead is output.
Parameter
No
Acknowledg
-
ment
None
Command
’OA’
Description
The switching outputs 1 and 2 can be activated with this command. The respective port
must have been configured as a switching output. The logic state is output, i.e., an
inverted logic is taken into account (e.g., inverted logic and a state of High corresponds
to a voltage of 0 V at the switching output).
Parameter
’OA<a>’
<a>
Selected switching output [1, 2], unit (dimensionless)
Acknowledg
-
ment
None
