Display and control panel AMS 384i
44
AMS 384
i
Leuze electronic GmbH + Co. KG
Note!
The rear cover of this manual includes a fold-out page with the complete menu structure. It
describes the menu items in brief.
8.3.2
Parameter menu
Parameter handling submenu
The following functions can be called up in the
Parameter handling
submenu:
• Lock and enable parameter entry
• Set up a password
• Reset the AMS 384
i
to the default settings
Additional important information on parameter handling can be found at the end of the
chapter.
Interbus submenu
Table 8.1:
Parameter handling submenu
Level 3
Level 4
Level 5
Selection/configuration option
Description
Standard
Parameter
enable
ON/OFF
The standard setting (
OFF
) prevents unintended parameter
changes.
With parameter enable activated (
ON
), the display is inverted.
In this state, it is possible to change parameters manually.
OFF
Password
Activate
password
ON/OFF
To enter a password, parameter enable must be activated.
If a password is assigned, changes to the AMS 384
i
can only
be made after the password is entered.
The master password 2301 overrides the individually set
password.
OFF
Password
entry
For setting a four-digit numerical password.
Parameters to
default
By pressing the enter button
after selecting
Parameters to default
, all parameters are reset to their standard
settings without any further security prompts.
In this case, English is selected as the display language.
Tabelle 8.2: Interbus submenu
Level 3
Level 4
Level 5
Selection/configuration option
Description
Standard
Activation
ON/OFF
Activates or deactivates the AMS 384
i
as an Interbus partic
-
ipant.
ON
Baud rate
500kbit/s / 2000kbit/s
Selection of the serial communication baud rate. The baud
rate specifies the velocity of the data transmission. It must be
identical on transmitter and receiver side in order to enable
communication.
500kbit/s
