Device description
Leuze electronic
ODS 9
24
3.4.6
Settings menu
You can set the display language and call up information about the sensor in the
Settings
menu.
Level 1
Level 2
Level 3
Description
Default
Settings
Language
Setting of the display language
Note
: If the display language is changed, this change only
becomes effective when the sensor is restarted.
English
Display language English
X
German
Display language German
Display
Display settings
On
The display (measurement value dis-
play) is always at full brightness.
Automatic
After pressing a control button, the
display is set to full brightness for
approx. one minute. The display is
then dimmed slightly for five minutes
and then dimmed considerably.
X
Autom. off
The display (measurement value dis-
play) is automatically switched off af-
ter approx. six minutes.
Off
No measurement value display – the
display is only active in the menu af-
ter pressing a control button.
Factory settings
Reset to factory settings
Inactive
The sensor is not reset to factory settings.
Execute
The sensor is reset to factory settings.
Password disable
Locks access to the menu with the fixed password
165
Inactive
Inactive
X
Activated
Active
Info
Information on the sensor
Part no.
Leuze part number of the sensor
Serial
number
Sensor serial number
Firmware
version
Firmware version
Exit behavior
(Exit behavior)
Exit the configuration settings
Report to DS
(Report to
DS)
After making a change in the menu, the change is taken
over in the data memory after returning to measurement op-
eration. The
DSUpload
flag is set.
The "Data Storage" (DS) parameter memory is updated.
Only local
changes
(only local
changes)
The change is only temporary or local on the device or no
data memory is used.
The
DSUpload
flag is cleared.