Place one (1) Floor Panel [
G
] starting on the
edge
of the Ramp assembly aligning the mounting holes [Figure 6].
Secure the Panel to the assembly using
three
(3) M6 x 40 ButtonHead Bolts [
H
], six (6) M6 Flat Washers [
E
], and three
(3) M6 Nylock Nuts [
J
] in the mounting holes located closest to the Transition Flap [
F
], as shown.
Secure one (1) Hinge [
K
] to the remaining mounting hole on the Floor Panel [
G
] using one (1) M8 x 40 Buttonhead Bolt
[
L
], two (2) M8 Washer [
M
] and one (1) M8 Nylock Nut [
N
] as shown [Figure 7].
PAGE 4 OF 9
STEP 4
STEP 5
[Figure 6]
[Figure 7]
TOOL(S): 5mm ALLEN WRENCH & 13mm SOCKET or WRENCH
TOOL(S): 4mm ALLEN WRENCH & 10mm SOCKET or WRENCH
G
H
E
J
E
M
M
N
K
G
L
