PAGE 8 OF 9
RAMP OPERATION
Never operate the vehicle with the Ramp in the DOWN POSITION.
WARNING:
TO SECURE RAMP UPRIGHT:
Lift and pivot the ramp upright until the Pull Latches located on the Side Tubes engage
into the “keyholes” of the Latch Keepers. [Figure 15 & 16]
NOTE:
Pull Latches may be offset and need to adjusted in order to operate properly.
TO FOLD DOWN RAMP:
Simultaneously pull the Latch Pulls toward the center of the Ramp until each Latch Keeper
releases.
Slowly lower the Ramp until it reaches the ground.
FOR FOLD FLAT STORAGE:
Release the Pull Latches and slowly lower the RAMP towards the carrier until the Ramp
lays fl at within the carrier basket.
NOTE:
For GearCage and Moover carrier models of 4ft length, the Transition Flap installed in STEP 3 will need to be
removed for fold fl at storage.
[Figure 15]
[Figure 16]
Pull Latches
