- 22 -
6.4
button
Note:
If there is fault event recorded in the event log, while user presses
button, the message will
show on the screen. Press
button again to view more events. At the end of the fault event lists,
the screen will return the first screen.
6.5
and
button (Option)
6.5.1
Press and hold
and
buttons simultaneously for 3
seconds
Note:
- “ ^ “ is shown at the latest event.
- The meaning of the first alphabet of the second row are as following
1 : Event happened
0 : Return to normal
A : Automatic run
R : Receive command via RS-232 or remote terminal
P : Self test passed
F : Self test failed
M : Manual control
Displays date, time and fault event.
Press
or
button to view
other events.
6.4.1
Press
buttons once
6.4.2
Press
buttons once again
6.4.3
Press
buttons once again
6.4.4
Press
buttons once again
6.4.5
Press
buttons once again
6.4.6
Press
buttons once again
Displays the present operation and
the status of the UPS.
Displays the status of INVERTER,
CHARGER, TRANSFER SWITCH and
RECTIFIER section.
Displays the condition of INVERTER,
CHARGER, TRANSFER SWITCH and
RECTIFIER section. ( “OK” means
“normal”.)
Displays firmware version.
Displays present date and time.
(option)
Return to the first screen.