SAFETY INSTRUCTIONS
Please read carefully and follow this LEONICS NB S-series/NBP S-series UPS guide.
Important : Please keep this manual for reference in order to use the LEONICS UPS properly and safely. This
user's guide contains instructions for installation, maintenance, operation and unit etc.
For product safety, please check this product annually by our service qualified personnel or if there are any
symptoms of problems which are not mentioned in this guide or any queries, please contact your LEONICS local
distributors, LEONICS Service Center, send e-mail to [email protected] or visit www.leonics.com.
For your convenience and quick reference for LEONICS UPS service, please fill
the requested information in the blanks below.
LEONICS UPS model: ___________________________________________
Serial number:
________________________________________________
Purchased date:
________________________________________________
Purchased from:
________________________________________________
CAUTION
Risk of electric shock, DO NOT remove cover. No user serviceable part inside,
please refer servicing to qualified service personnel.
1.1 Electrical Safety
1.1.1 Do not work alone where there is danger of shock.
1.1.2 Contact with live conductors will cause burns and dangerous electric shock.
1.1.3 Please allow ONLY a certified electrician to wire your system permanently.
1.1.4 Periodically check your cable, outlets and power source to make sure that they are in good condition.
1.1.5 To reduce risk from electric shock if you can not find the electrical ground (
)of the building, unplug
the UPS from the AC source before plug in your load at the rear side of the UPS. Then, plug in the UPS to
AC source.
1.1.6 Do not touch any metal parts or any electrical connection when UPS is operating.
1.1.7 It is recommended to connect the UPS to a three wire AC source (two live wires and ground) which
connects to a protected circuit such as employs a fuse or circuit breaker.
1.2 CAUTION ! Safety guide for installation and operation
1.2.1 Before installation or using this unit, read all instructions, caution markings on the UPS and all
connected load, and all sections of this user guide.
1.2.2 Install this unit in a temperature and humidity controlled indoor area with adequate air flow and away
from chemical particles or flammable substances. Avoid installing the unit near radio transmission
station, heat dissipation equipment and direct sunlight.
1.2.3 This unit has ventilation grills. Ensure that sufficient ventilation is provided. DO NOT block the
ventilation grills.
1.2.4 Use insulated tools to reduce your risk of electric shock.
1.2.5 Remove all jewelry or other metal objects such as rings, necklace, bracelets and watches when installing
this product.
1.2.6 Properly wiring the cables as shown in the wiring diagram.
- 1 -
