7.4 Parameter setting
After user inputs the correct password, parameter values can be changed. To change the value, press
button. Then press
or
button to toggle the value. Press
button to confirm the new setting
or press
button to cancel.
7.4.1
Press
and
buttons
simultaneously once.
7.4.2
Press
button twice.
7.4.3
Press
button once.
7.4.4
Press
button once.
7.4.5
Press
button once again.
7.4.6
Press
button once again.
7.4.7
Press
button once again.
7.4.8
Press
button once again.
Enters system control setting.
Enters system data setting.
Confirms to enter system data setting
and displays set value of low bypass
input voltage.
Displays special converter output
frequency set value. The value can be
set to one decimal place.
Displays set value of no load condition
in percentage.
Displays set value of synchronize
output frequency range.
Displays set value of output
frequency.
Displays set value of inverter output
voltage.
SYNC
- 26 -
Confirms date (month). Sets date.
Confirms date (date). Sets day.
Confirms day.
7.3.2.7 Press
buttons once again.
7.3.2.8 Press
button once again.
7.3.2.9 Press
button once again.
