Menu Screen 12:
Additional Optional Flow Sensor (F2) OR Optional Pressure Sensor Input Channel (P3)
Pressing
▼
12 times displays
Flow 2: XXX or Psi 3: XX.X
This indicates and displays actual flow in (GPM) on Flow channel 2 for the optional Daughter Board.
See Page 28 for wiring setup.
NOTE:
This channel can also be configured to accept a Pressure Sensor as an alternate and can be
setup in the commissioning menu. See Commissioning Menu.
If this channel is configured to accept a pressure input instead, the Menu Screen will look as follows:
10
This is an indication of the actual measured value of pressure (PSI) on pressure sensor 3 (P3) if the
Nucleus is so equipped with the optional Pressure Sensor (P3).
Note:
A large negative value displayed at the
Flow 2
or
Psi 3
line is an indication that there is no
sensor installed to the main control board, the wiring to the main board is improper or the sensor
is damaged.
Pressing
▼
11 times displays
Flow 1: XXX
This indicates and displays actual flow in (GPM) on Flow channel 1 for the optional Daughter Board.
See Page 28 for wiring setup.
Note:
A large negative value displayed at the
Flow 1
line is an indication that there is no sensor
installed to the main control board, the wiring to the main board is improper or the sensor is
damaged.
Menu Screen 11:
Optional Flow Sensor (F1)
