9400 HighLine | Commissioning guide
About this documentation
Conventions used
24
EDB94AxH6954 DE/EN/FR/ES/IT 1.0
L
1
About this documentation
This documentation is a guide for (initial) commissioning 9400 HighLine controllers. It
complements the mounting instructions supplied with the controller, the hardware
manual, and the software manual for the controller.
Target group
This documentation is intended for qualified staff according to IEC 364.
Information on validity
The information in this documentation is valid for the following standard devices:
Document history
Copyright information
All texts, photos and graphics contained in this documentation are subject to copyright
protection. No part of this documentation may be copied or made available to third parties
without the explicit written approval of Lenze Drive Systems GmbH.
Liability
All information given in this documentation has been carefully selected and tested for
compliance with the hardware and software described. Nevertheless, discrepancies
cannot be ruled out. We do not accept any responsibility or liability for any damage that
may occur. Required correction will be included in updates of this documentation.
1.1
Conventions used
This documentation uses the following conventions to distinguish between different types
of information:
Product range
Type designation
From software version
9400 Servo Drives
E94AxHExxxx
3.0
Material number
Version
Description
13237623
1.0
02/2008 TD05 First edition
Type of information
Writing
Examples/notes
Spelling of numbers
Decimal separator
Point
Generally, the decimal point is used.
For example: 1234.56
Text
Program name
» «
The Lenze PC software »Engineer«...
Window
Italics
The
Message window
... / The
Options
dialog box...
Control element
Bold
The
OK
... button / The
Copy
... command / The
Properties
...tab