Lenze g500-H100, Project Planning

Page: 64 / 156

Selection tables
Notes on the selection tables
The selection tables represent the available combinations of gearbox, number of stages, ratio
and motor for the mounting position M1. They only serve as a rough overview.
The following legend shows the layout of the selection tables:
Example Explanation
Inverter power supply 400 V, self-ventilated motors Voltage of inverter mains connection, motor cooling type
2 kW Rated motor power
Inverter operation Geared motor Number of
stages
M
2
n
2
c M
2,max
n
2,th
J i g500- m850- z m
Nm rpm Nm rpm
kgcm
2
kg
15.0 1212 3.9 46.0 1056 7.402 3.267 H140 120S40 2 11
16.0 1181 2.9 47.0 970 7.025 3.354 H100 120S40 2 10
16.0 1169 5.8 48.0 915 8.030 3.389 H210 120S40 2 13
21.0 884 3.3 63.0 828 7.036 4.480 H140 120S40 2 11
Mass
Number of gear stages
Motor product name
Gearbox product name
Ratio
Moment of inertia
With feedback, without brake
Max. permissible output speed in S1 operation
Max. permissible acceleration torque
Dependent on inverter
Load capacity of the gearbox
c is the ratio of permissible rated torque of the gearbox to the rated torque of the motor (converted to the driven shaft).
c must always be higher than the application factor detected for the application k.
= >
´ ´ h
2,zul
1,N Getr
M
c k
M i
Output speed
Output torque
Technical data
Selection tables
64