Lenze g500-H100, Project Planning

Page: 14 / 156

Mounting positions
Details of the mounting position are needed to ensure the corresponding lubricant amount,
position of the ventilation, oil checks and oil drain plug on the gearbox.
To reduce the number of different versions, the gearboxes can also be ordered with combined
mounting positions:
•
g500-H100 ... H450 in mounting position M1/5/6 (AEF)
M1 [ A ]
M2 [ D ]
M5 [ F ]
M3 [ B ]
M4 [ C ]
M6 [ E ]
Defined positions on the geared motor
All of the defined positions refer to the areas on the geared motor in
mounting position M1 (A) .
Position of the built-on accessories with T, L, R, B, F, E (Top, Left,
Right, Bottom, Front and End) If the geared motor is rotated into a different mounting position
M2 ... M6 (B...F), the defined positions on the geared motor are
retained.
T [ 2 ]
E [ 1 ]
R [ 5 ]
B [ 4 ]
F [ 6 ]
L [ 3 ]
Example: Mounting position M5 (F)
E [ 1 ]
T [ 2 ]
R [ 5 ]
F [ 6 ]
B [ 4 ]
L [ 3 ]
Product information
The modular system
Mounting positions
14