35
If you wish to map a function to the dimming, you will have to set
the corresponding bit.
Bit:
1
2
3
4
5
6
7
8
CV57
F1
F2
F3
F4
F5
F6
F7
F8
0
0
0
1
0
0
0
0
In the above example, the dimming function is switched on and
off with F4.
Here, you can also set several bits and thus use several
functions to switch the dimming function on and off.
15.2
Effects at outputs A and B
The settings for the effects at function outputs A and B are
carried out in CV60. The following rule applies:
•
The units digit determines the effect for output A
•
The tens digit determines the effect for output B
The set effect always works for the function output, unless you
have mapped functions in CV61.
CV60:
The following effects are available:
Output B
Tens =
Output A
Units =
No effect
0
0
Mars light
1
1
Gyra light
2
2
Strobe (flash)
3
3
Double strobe (double flash)
4
4
Examples:
Enter the following values in CV60:
"00" results in no effect at outputs A and B.
"01" results in Mars light at output A and no effect at output B.
"23" results in Gyra light at output B and strobe at output A.
