- 13
EN
CAUTION!
PROPERTY DAMAGE!
• The electric kettle becomes very hot
after operating it. Hold only the handle
of the kettle and operate only the
unlock key and the on/off switch.
• In any case, do not fill alcohol, sugar
or milk in the electric kettle!
Implementing:
commissioning and boiling water
(100°C):
1. Place the appliance on a dry, flat,
skid resistant base.
2. Pick the electric kettle (1) from the
appliance base (2) and open the lid
(3) of the electric kettle (1).
3. Fill the kettle (1) until the marking,
that shows the maximum fill level and
close back the lid (3) opened earlier.
4. Place the electric kettle (1) again on
the appliance base (2).
5. Insert the mains plug in a well acces-
sible electrical socket, the voltage of
which complies with the data on the
type plate.
6. The kettle beeps twice to confirm
that it is ready for operation.
7. Now actuate the on/off switch (4).
The kettle beeps once to confirm and
the display lights up.
8. Now select the desired temperature
using keys 5 to 8. The kettle will beep
for confirmation. The switch for the
selected temperature (5-8), the on/off
switch (4) and the kettle itself now light
up permanently during the cooking
process. You can also read the current
water temperature on the station
display in real time.
a. The kettle will not start cooking
until the temperature has been
selected. If no selection is made,
the kettle switches itself off again
after a short time.
b. The selected temperature can also
be changed during cooking. To do
this, press the desired new temperature
while cooking.
9. After the kettle has reached the
desired temperature, it switches itself
off automatically and confirms the end
of the cooking process with a triple
beep.
10. Pour out the water from the first and
second boiling cycles and rinse the
inside of the kettle with new water. Do
not drink the water! We recommend
two 100° boiling cycles before the first
use to completely remove any produc-
tion residue.
11. After you have carried out the
upper point 10, your water perforator is
now ready for use.
10. Cleaning
DANGER-
ELECTRIC SHOCK!
• Pull out the mains plug from the
socket before you clean the electric
kettle.
• The electric kettle, the appliance
base, the connecting cable and
the mains plug are not allowed to
be immersed in the water or other
liquids.
WARNING-
RISK OF INJURY!
• The electric kettle becomes very
hot after operating it. Let it cool down
before cleaning.
74138 Bedienungsanleitung.indd 13
15.05.19 17:57