Lenovo ThinkSystem ST50 V2, Maintenance Manual

Page: 93 / 192

Procedure
Step 1. Make preparation for this task.
a. Remove the server cover, see “Remove the server cover” on page 143 .
Note:
The heat sink and processor could be very hot. To avoid burning yourself, wait for a few
minutes after turning off the server before you remove the server cover.
Step 2. Remove the front bezel.
a. Release the three plastic tabs on the front bezel.
b. Rotate the front bezel to remove it from the chassis.
Figure 65. Removing the front bezel
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front bezel
Follow this procedure to install the front bezel.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Chapter 3
.
Hardware replacement procedures
85