Lenovo ThinkPad T540p User Manual Download Page 96

Page: 96 / 194

5. Hold the new SIM card with the metal contact facing upward and going into the slot first. Then, insert

the new SIM card firmly into the slot until it clicks into place.

6. Reinstall the battery pack. See “Replacing the battery pack” on page 77.

7. Turn the computer over again. Connect the ac power adapter and all cables to the computer.

Replacing the Ultrabay device

Before you start, print these instructions.

To replace the Ultrabay device, doing the following:

1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer. Wait

three to five minutes to let the computer cool.

2. Close the computer lid and turn the computer over.

3. Remove the battery pack. See “Replacing the battery pack” on page 77.

4. Loosen the screws

, and then remove the large bottom cover

User Guide

Summary of Contents for ThinkPad T540p



































































































































































































Search results

Summary of Contents for ThinkPad T540p

Reviews:

Related manuals for ThinkPad T540p

Brands by name

Popular brands

Lenovo ThinkPad T540p, User Manual

Search results

Summary of Contents for ThinkPad T540p

Reviews:

Related manuals for ThinkPad T540p

Brands by name

Popular brands