Lenovo ThinkPad T450s User Manual Download Page 90

Page: 90 / 185

Note:

After installing the operating system, do not change the initial

UEFI/Legacy Boot

setting in the

ThinkPad Setup program. Otherwise the operating system will not start correctly.

When you install the Windows 7 operating system, you might need one of the following country or region
codes:

Country or region

Code

Country or region

Code

China

Netherlands

Denmark

Norway

Finland

Spain

France

Sweden

Germany

Taiwan and Hong Kong

Italy

United States

Japan

Installing the Windows 8.1 operating system

Before you start, print these instructions.

Attention:

• The process of installing a new operating system deletes all the data on your the storage devices,

including the data that were stored in a hidden folder.

• If your computer is equipped with both a hard disk drive and an M.2 solid-state drive, do not use the

M.2 solid-state drive as a bootable device. The M.2 solid-state drive is used for “cache” function and to
support the Intel Rapid Start Technology.

To install the Windows 8.1 operating system, do the following:

1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 75.

2. Select

Startup

➙

Boot

to display the

Boot Priority Order

submenu.

3. Select the drive that contains the Windows 8.1 operating system installation program, for example

USB HDD

4. Press F10. A Setup Confirmation window is displayed. Click

Yes

to save the configuration and exit

the ThinkPad Setup program.

5. Connect the drive that contains the Windows 8.1 operating system installation program to the computer,

and restart the computer.

6. Install the Windows 8.1 fix modules. Go to the Microsoft Knowledge Base home page at

http://support.microsoft.com/. Type the number of the fix module in the search field, then click

Search

7. Install the registry patches, for example the Enabling Wake on LAN from Standby for ENERGY STAR

patch. To download and install the registry patches, go to the Lenovo Support Web site at:
http://www.lenovo.com/support

8. Install the device drivers. See “Installing device drivers” on page 75.

Note:

After installing the operating system, do not change the initial

UEFI/Legacy Boot

setting in the

ThinkPad Setup program. Otherwise, the operating system will not start correctly.

When you install the Windows 8.1 operating system, you might need one of the following country or region
codes:

User Guide

Summary of Contents for ThinkPad T450s


























































































































































































Search results

Summary of Contents for ThinkPad T450s

Reviews:

Lenovo ThinkPad T450s, User Manual, Page: 90 / 185

Search results

Summary of Contents for ThinkPad T450s

Reviews: