Lenovo ThinkPad T450s, User Manual, Page: 139 / 185

Chapter 10. Replacing devices
This chapter provides information about replacing devices.
To get new CRUs, contact Lenovo. For more information, see Chapter 11 “Getting support” on page 145.
• “Static electricity prevention” on page 123
• “Disabling the built-in battery” on page 123
• “Installing or replacing the micro SIM card” on page 124
• “Replacing the removable battery” on page 125
• “Replacing the base cover assembly” on page 127
• “Replacing the hard disk drive, solid-state drive, or hybrid drive” on page 128
• “Replacing a memory module” on page 131
• “Replacing the wireless WAN card” on page 132
• “Replacing the keyboard” on page 135
• “Replacing the coin-cell battery” on page 141
Static electricity prevention
Static electricity, although harmless to you, can seriously damage computer components and options.
Improper handling of static-sensitive parts can cause damage to the part. When you unpack an option or
a CRU, do not open the static-protective package that contains the part until the instructions direct you
to install the part.
When you handle options or CRUs, or perform any work inside the computer, take the following precautions
to avoid static-electricity damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle components carefully. Handle adapters, memory modules, and other circuit boards by the
edges. Never touch exposed circuitry.
• Prevent others from touching components.
• When you install a static-sensitive option or CRU, touch the static-protective package that contains the
part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two
seconds. This reduces static electricity in the package and your body.
• When possible, remove the static-sensitive part from the static-protective package and install the part
without setting it down. When this is not possible, place the static-protective package on a smooth,
level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.
Disabling the built-in battery
Before replacing any devices, ensure that you have disabled the built-in battery by doing the following:
1. Disconnect the ac power adapter and all cables from the computer.
2. Restart the computer. When the ThinkPad logo is displayed, press F1 to start the ThinkPad Setup
program.
© Copyright Lenovo 2015 123