Lenovo Storage N4610, User Manual And Hardware Maintenance Manual

Page: 95 / 176

1. Remove all media from the drives and turn off all attached devices and the storage product. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the storage product.
2. Prepare your storage product. See “Removing or extending the storage product from the rack cabinet”
on page 51.
3. Remove the storage product cover. See “Removing the cover” on page 51.
4. Remove the riser card assembly and lay it upside down on a flat, clean, and static-protective surface.
See “Replacing the riser card” on page 68.
5. Locate the PCIe card you want to remove. Then, press the tab to pivot the card latch to the open
position.
Figure 52. Pivoting the card latch to the open position
Chapter 6
.
Replacing hardware
81