Lenovo Storage N4610, User Manual And Hardware Maintenance Manual

Page: 150 / 176

Note: Depending on the model, your storage product might look different from the illustrations in this topic.
To reinstall the cover and reconnect cables to your storage product, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your storage product.
2. Ensure that all internal cables are connected and routed correctly and secured by any cable clips or ties
in the storage product. Keep cables clear of the hinges and sides of the chassis to avoid interference
with reinstalling the cooling shroud and the storage product cover.
• Route the power cable 1 for the front backplane through the right inner side of the chassis.
• Properly route the cable 2 that is connected from the front panel board to the front panel connector 1
on the system board.
• Properly route the cable 3 that is connected from the from the AnyRAID adapter to the AnyRAID
connector on the system board.
1
2
3
Figure 123. Cable routing
3. If you have removed the cooling shroud, reinstall it. See “Removing and reinstalling the cooling shroud”
on page 54.
136
Lenovo Storage N4610 User Guide and Hardware Maintenance Manual