Lenovo RackSwitch G7028, Installation Manual

Page: 38 / 86

38
G7028 Installation Guide
Installing the G7028 in a Lenovo System x or Power Rack
This section describes how to install the G7028 in a Lenovo System x
®
or Power
4-post rack, using the Lenovo Adjustable 19” 4-Post Rail Kit.
This kit must be purchased separately. It includes the following parts:
Note:
When using a System x or Power 4-post rack, the 4-Post Rail Kit is
compatible with the optional air-duct kit (available separately). See “Installing
the Air-Duct Option” on page 47 for details.
Statement 26
CAUTION:
Do not place any object on top of rack-mounted devices.
To install the G7028 in a System x or Power rack, complete the following steps:
1. Locate, record, and retain the product switch information in order to configure
and register your product. See “Recording Important Product Information” on
page 30 .
Note:
If this switch is a replacement switch, copy the product information from the
original switch onto the RID label that is shipped with replacement switch
and affix the new label to the bottom of the new switch.
Table 8. Lenovo Adjustable 19” 4-Post Rail Kit parts
Item number Description Quantity
1
Switch front bracket 2
2
M4 screws 16
3
M6 screws 8
4
M6 clip nuts 8
5
M6 cage nuts 8
6
M3.5 screws 4
7
Rear mounting bracket 1
8
Rear mounting bracket with cord exit 1
9
Filler plate 1
10
M6 locking washers 8