Lenovo px2-300d User Manual Download | Manualshive

Page: 169 / 172

background image

Regulatory Information

This topic provides regulatory information for various countries.

Manufacturer/Responsible Party

LenovoEMC, Ltd., 4059 South 1900 West, Roy, UT 84067

EU Representative

Lenovo, Einsteinova 21, 851 01 Bratislava, Slovakia

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

●

Reorient or relocate the receiving antenna.

●

Increase the separation between the equipment and receiver.

●

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

●

Consult an authorized dealer or service representative for help.

Lenovo is not responsible for any radio or television interference caused by using other than
specified or recommended cables and connectors or by unauthorized changes or modifications to
this equipment. Unauthorized changes or modifications could void the user’s authority to operate
the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Canadian Verification

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations (ICES-003, Class B).

Legal

Regulatory Information

159

«
...
167
168
169
170
171
...
»

Summary of Contents for px2-300d













































































































































































Reviews:

No comments

Related manuals for px2-300d

i-bus KNX IPR/S 3.5.1

Brand: ABB Pages: 44

Brand: DB GROUP HERRAJES Pages: 4

Brand: NEC Pages: 59

Brand: Campbell Pages: 46

Brand: Kaptia Pages: 14

D-NVR4108HS-4KS2/L

Brand: Dahua Pages: 33

Brand: Hunter Pages: 2

XC-16CH-NVR-4TB

Brand: Xyclop Pages: 19

Brand: Patton electronics Pages: 8

Brand: AIC Pages: 105

Brand: LevelOne Pages: 49

Brand: Rosco Pages: 20

Brand: Matrix Switch Corporation Pages: 60

Brand: Net Optics Pages: 2

SATAII/300 INTERNAL HARD DRIVE

Brand: Maxtor Pages: 19

Brand: Goonas Pages: 13

Brand: N-Tron Pages: 2

Brand: Ledger Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands