manualshive.com logo in svg

Lenovo px2-300d, User Manual

Share
Download
Lenovo px2-300d User Manual Download Page 17

Enabling Jumbo Frames for Each NIC

You can enable jumbo frames for each NIC in your px2-300d by expanding the Information section for a 
NIC and entering a jumbo frame size in the Jumbo Frame field.  If you do not want jumbo frame support, 
leave the field blank. Jumbo frame support is useful for transferring large files, such as multimedia files, 
over a network. Jumbo frame support increases transfer speed by placing large files in fewer data packets. 
It also reduces the demand on the device hardware by having the CPU process more data in fewer data 
packets.

Jumbo frame support should only be enabled if you are sure your network is jumbo-frame compatible and 
all network devices have been configured to support jumbo frames. It is recommended that you confirm all 
network interface cards (NICs) are configured to support jumbo frames before enabling this feature.

VLAN

Each NIC in your px2-300d can be added to up to four Virtual LANs (VLAN). For more information on 
adding a NIC to a VLAN, refer to 

VLAN Settings

.

Manually Configuring Network Settings

There are various settings in the network setup that you can manually configure.

1.  Click 

Modify network settings.

2.  Uncheck Automatically configure DNS, WINS, and all IP addresses (DHCP).

3.  DNS Servers — enter the IP addresses of the DNS (Domain Name System) servers. DNS is 

used for translating the domain name to IP addresses.

4.  WINS Servers — enter the IP addresses of the WINS server.

5.  From the Bonding Mode drop-down menu, choose one of the following:

●

Transmission Load Balance — increases bandwidth by distributing the load across multiple 
NICs.

●

Link Aggregation — increases bandwidth by distributing the load across multiple ports in a 
switch. Link Aggregation requires an 802.3ad compatible switch.

●

Failover — provides recovery from a failure, so if one NIC should fail, your system still has 
network connectivity with the other NIC.

6.  To connect your px2-300d to a proxy server, check Use proxy settings and enter proxy IP 

address, port number, and the proxy username and password.

7.  Click Apply to save your settings.

8.  If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign 

an IP address, or you can uncheck the Automatically acquire network address (DHCP) 
checkbox found in the Information section of a NIC.

9.  You can change the following settings in the Information section:

●

IP Address — the static IP address of the px2-300d. Use an available IP address in the range 
used by the LAN.

●

Subnet Mask — the subnet that the IP address belongs to. The default value is 255.255.255.0.

●

Gateway — enter the gateway IP address in this field.

10.  Click Apply to save your settings.

 

Setting up Your px2-300d Network Storage

Connecting

the px2-300d

7

Summary of Contents for px2-300d













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands