Lenovo IdeaPad S310, Hardware Maintenance Manual

Page: 75 / 142

Diagnostic Error Code FRU/Action
080-199-XXX Game Port interface test failed, cause
unknown
1. See “Undetermined problems” on page 76.
2. Flash the system and re-test. See “Flash update
procedures” on page 127.
3. Replace component under function test.
086-000-XXX Mouse Port interface Test Passed No action
086-001-XXX Mouse Port interface Presence 1. Mouse
2. System board
086-032-XXX Mouse Port interface Device controller failure 1. Mouse
2. System board
086-035-XXX Mouse Port interface Reset 1. Mouse
2. System board
086-040-XXX Mouse Port interface IRQ failure 1. Run the Setup Utility program.
2. Mouse
3. System board
086-195-XXX Mouse Port interface Test aborted by user Information only Restart the test, if necessary.
086-196-XXX Mouse Port interface test halt, error
threshold exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
086-197-XXX Mouse Port interface test warning 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
086-198-XXX Mouse Port interface test aborted 1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Flash the system and re-test. See “Flash update
procedures” on page 127.
3. Go to “Undetermined problems” on page 76.
086-199-XXX Mouse Port interface test failed, cause
unknown
1. See “Undetermined problems” on page 76.
2. Flash the system and re-test. See “Flash update
procedures” on page 127.
3. Replace component under function test.
089-000-XXX Microprocessor Test Passed No action
089-XXX-XXX Microprocessor failure 1. Microprocessor(s)
2. System board
089-195-XXX Microprocessor Test aborted by user Information only Restart the test, if necessary.
089-196-XXX Microprocessor test halt, error threshold
exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
Chapter 7
.
Symptom-to-FRU Index
69