Lenovo IdeaPad S310, Hardware Maintenance Manual

Page: 74 / 142

Diagnostic Error Code FRU/Action
071-04X-XXX Audio port failure 1. Run the Setup Utility program.
2. Audio card, if installed.
3. System board
071-195-XXX Audio port Test aborted by user Information only Restart the test, if necessary.
071-196-XXX Audio port test halt, error threshold exceeded 1. Press F3 to review the log file.
2. Restart the test to reset the log file.
071-197-XXX Audio port test warning 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
071-198-XXX Audio port test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Flash the system and re-test. See “Flash update
procedures” on page 127.
3. Go to “Undetermined problems” on page 76.
071-199-XXX Audio port test failed, cause unknown 1. See “Undetermined problems” on page 76.
2. Flash the system and re-test. See “Flash update
procedures” on page 127.
3. Replace component under function test.
071-25X-XXX Audio port failure 1. Speakers
2. Audio card, if installed
3. System board
080-000-XXX Game Port interface Test Passed
No action
080-XXX-XXX Game Port interface Error 1. Remove the game port device and re-test the
system.
080-195-XXX Game Port interface Test aborted by user Information only Restart the test, if necessary.
080-196-XXX Game Port interface test halt, error threshold
exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
080-197-XXX Game Port interface test warning 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
080-198-XXX Game Port interface test aborted 1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51
2. Flash the system and re-test. See “Flash update
procedures” on page 127.
3. Go to “Undetermined problems” on page 76.
68
Lenovo S310 All-In-OneHardware Maintenance Manual