Lenovo IdeaPad S310, Hardware Maintenance Manual

Page: 55 / 142

• If the software program used to work correctly, but does not work correctly now, do the following:
On the Windows 7 operating system, click Start ➙ Control Panel ➙ System and Security ➙ System ➙
System Protection ➙ System Restore .
• If you are unable to resolve the problem through other methods, uninstall the software program and
reinstall it.
If these actions do not correct the problem, you might need technical assistance. Contact your software
manufacturer or see “Additional information resources” on page 29 for details.
USB problems
Symptom: The USB connectors cannot be accessed.
Actions:
• Make sure the USB cable is securely connected to the USB connector and to the USB device. If the USB
device has its own power cord, make sure it is attached to a properly grounded electrical outlet.
• If the USB device has its own On/Off switch, make sure it is in the On position.
• If the USB device has an Online switch, make sure it is in the Online position.
• If the USB device is a printer, make sure paper is loaded correctly.
• Make sure any device drivers or other software supplied with the USB device is correctly installed.
Refer to the documentation for the USB device.
• Reset the device by detaching and reattaching the USB connector.
If these actions do not correct the problem, run the diagnostic programs to test the USB connector. If the
USB device came with its own diagnostics, run those diagnostics against the USB device. If you need
technical assistance, see “Additional information resources” on page 29.
Chapter 5
.
Troubleshooting and diagnostics
49