Lenovo 41N5631, User Manual

Page: 16 / 68

Hardware and software requirements
You must have the following hardware installed on your host computer in order to use this option:
v
Available USB 2.0 port
Your computer must have one of the following operating systems installed to use this option:
v
Microsoft
®
Windows
®
XP
v Microsoft Windows 2000 (Service Pack 4 or later)
Note: The drive will not operate correctly unless Service Pack 4 or later is installed.
Preparing to use the Lenovo USB 2.0 Super Multi-Burner Drive (With
LightScribe)
Before using the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe), follow the procedure
below:
1. Make sure the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) is properly connected to
your host computer (Please refer to the “Power mode configurations” on page 1-5).
2. Check the locations of the functions on the Lenovo USB 2.0 Super Multi-Burner Drive (With
LightScribe) (refer to the figures below).
3. Insert the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) Software and User’s Guide Super
CD that was shipped with this option to install the CD-R/CD-RW/DVD writing software.
4. Double-click on the application you want and follow the instructions on the screen.
5.
Check that the drive operates normally and keep the enclosed warranty in a safe place after filling it
in.
Following are the locations of the functions on the host USB 2.0 Super Multi-Burner Drive:
1
Disc tray Firmly seat the media with the label face up on the disc tray.
Attention: Push the CD/DVD media down until it clicks and is secure in the
center.
2
DC IN connector Connect the provided AC adapter into the DC IN connector.
3
USB connector Insert the plug of the provided dedicated USB cable.
1-4
Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) User’s Guide