Lenovo 30BA Hardware Maintenance Manual Download Page 174

Page: 174 / 254

b. Disconnect the super-capacitor-module cable from the RAID adapter. Then, remove the holder with

the failing super capacitor module.

Figure 129. Removing the super capacitor module

4. To install a new super capacitor module, do the following:

a. Touch the static-protective package that contains the new super capacitor module and its holder to

any unpainted surface on the outside of the computer. Then, remove the new super capacitor
module and its holder from the package.

b. Pull and pivot the tab on the front fan assembly as shown to open the latch inside.

Figure 130. Opening the latch in the front fan assembly

c. Connect the super-capacitor-module cable to the super capacitor module connector on the RAID

adapter.

168

P720 Hardware Maintenance Manual

Summary of Contents for 30BA































































































































































































































































Search results

Summary of Contents for 30BA

Reviews:

Brands by name

Popular brands

Lenovo 30BA, Hardware Maintenance Manual

Search results

Summary of Contents for 30BA

Reviews:

Brands by name

Popular brands