Lenovo 30BA Hardware Maintenance Manual Download Page 119

Page: 119 / 254

c. Push the metal bracket down until the tab

is slightly curved. Then, push the bracket with the

storage drive forward as shown until the tab

snaps into position.

Figure 28. Installing the metal bracket into the plastic frame of the converter

d. Flex both sides of the plastic bracket and align pins

on the plastic bracket with the corresponding

holes in the plastic frame of the converter.

Notes:

• Ensure that the circuit board faces downward and the connectors face toward the rear of the

bracket.

• Do not touch the circuit board on the storage drive during operation.

Figure 29. Installing the converter with the 2.5-inch storage drive into the plastic bracket

Chapter 9

Hardware removal and installation

113

Summary of Contents for 30BA































































































































































































































































Search results

Summary of Contents for 30BA

Reviews:

Brands by name

Popular brands

Lenovo 30BA, Hardware Maintenance Manual

Search results

Summary of Contents for 30BA

Reviews:

Brands by name

Popular brands