Lenovo 10AU, User Manual

Page: 64 / 158

7. Remove the four screws that secure the solid-state drive to the bracket. Then, slide the drive as shown
to remove it from the bracket.
Figure 33. Removing the solid-state drive from the bracket
8. Take the new solid-state drive out of the static-protective package.
9. Slide the new solid-state drive into the solid-state drive bracket as shown until the four holes in the
drive are aligned with the corresponding holes in the bracket. Then, install the four screws to secure the
new solid-state drive to the bracket.
Figure 34. Installing the solid-state drive into the bracket
52
ThinkCentre E73 User Guide