Functions of the operating and display elements
20
Programming
keys
(cursor block)
Operating elements and function keys
If you wish to carry out settings or enter data, or if alterations are
necessary, press the
"M" key
to open the programming mode. Use
this key when
in the menu
to go to the higher order menu items or to
exit the programming mode. Please note: The basic program is
password protected!
Programming keys (cursor block)
Use the programming keys (cursor block) to navigate in the menu, to
select the desired functions and to enter necessary instrument and
plant specific data. Press the "ENTER" key to select the submenu
item and to confirm and accept the selection or data input.
Function keys
Press the
"manual"
key
to start an analysis by hand
Press the
"STANDBY"
key
to put the instrument into
standby mode (automatic analyses are not carried out:
analysis stop)
Press the
"Horn"
key
to acknowledge error and
warning messages
Press the
"M"
key
to open the programming menu for
user specific and instrument specific settings
Press the
"i"
key
to call all instrument information and
settings
(M)enu key
Cursor block
Summary of Contents for Testomat 2000
Page 53: ...Technical data 53 Conformity Declaration ...
Page 57: ...57 ...
