Lenntech Testomat 2000, Operating Instructions Manual

Page: 24 / 58

Password protection and basic program
24
Minimum interval = 1 litre, maximum interval = 9999 litres. The
analysis is carried out once the programmed water quantity has been
measured. The line and the measuring chamber are flushed prior to
the analysis (observe the programmed flush times).
Selecting the volume control

In the menu, select
=> => =>

Press "ENTER" to confirm the selection
(An asterisk " * " appears at the end of the line)
The menu appears

Enter the respective flow rate in litres

Press "ENTER" to confirm the entry
Selecting the type of water meter

Select the menu
=> => =>

Select the water meter constant (litre/impulse)
(100 litres/impulse " * " is factory set)

Press "ENTER" to confirm the selection
The analysis is carried out once the programmed water quantity has
been measured. An analysis is always triggered with higher priority
when the programmed interval time has been reached.
Selecting the volume control/time priority

The process is the same as for "Selecting the time control"

The process is the same as for "Selecting the volume control"

Press "ENTER" to confirm all the entries
▼▲
Volume controlled
Start via water meter
Volumen control /
Time priority
▼▲
▼▲
▼▲