18 / 23
Confirm maintenance
(10)
After maintenance has been carried out confirm this by pressing "ENTER", and leave this item by pressing "M". The
maintenance interval is started afresh.
L
A maintenance request at the end of the maintenance interval must be confirmed in the M-menu. The message on
the display is deleted and the maintenance output is reset.
For information on which maintenance has to be carried out and in which time intervals refer to the section
maintenance
on page 22.
Diagnosis
(11)
The current status of the signal inputs and outputs can be called up from a list.
An active status is marked with a * (see menu structure).
Date/time of day
(12)
Set the time of day and date by selecting the desired function using the arrow keys and activating them by pressing
"ENTER". Then press the "M" key again to store the setting and to return to the display mode.
Basic program
This menu item is only reached after entering the password!
Example for a password entry:
>BASIC PROGRAM
07:25
21.04.00
07:25
Password:
____
_ _ _ _
(5270)
After entering the password and confirming it by pressing "ENTER", it is possible to carry out the basic programming of
the unit and to select a number of service functions (e.g. calibration).
Program values
To call up the factory-set basic default setting, briefly hold down the "M" and "i" keys while switching the unit "ON".
Values and settings are described in the structure of the basic program on page 19.
The following program values can be entered and stored in the basic program:
Abbreviations:
s = seconds
m = minutes
h = hours
d = days
l = litres
