Lenhardt & Wagner LW 320 E MC, Operating Instructions Manual

Page: 93 / 221

ECC - Electronic compressor control Page B - 15
B
Maintenance Menu (M600)
Pushing key 6 in the Selection Menu leads to the "Maintenance Menu".
Hours remaining
Oil change 14 h Shows remaining hours of listed components
Sinter filt 989 h (i.e. next oil change in 14 hours,...)
Silencer 4989 h
Valves 5989 h
Oil filter 1000 h
8 Change done
Key 8 leads to submenu “Receipt Maintenance”
Key 9 leads back to submenu „Selection“
(M600) Return : #
Key # leads back to “Main Menu”
9 Close
Remaining hours depend on the type. At the end of any remaining hours, the display indicates a
warning message. Furthermore, the display informs about any possibly necessary spare parts with
the corresponding L&W service part number.
Attention during maintenance
During automatic mode, the compressor can automatically start by itself at any time,
depending on the selected restart pressure (see "Set Restart Pressure" M330).
!
O P E R A T I O N A N D F U N C T I O N
Version: 271012-001 E