Lenhardt & Wagner LW 320 E MC Operating Instructions Manual Download Page 18

Page: 18 / 221

A - 16

LW 320 E MC / LW 400 E MC
Version: 16.03.2015

S A F E T Y P R E C A U T I O N S

Transportation instructions

• Parts which need to be dismantled for transport purposes must be carefully replaced and secured

before taking into operation.

• The transport may only be carried out by trained personnel.

• For transportation, only use lifting devices and equipment with sufficient lifting power.

• Do not stand or work under suspended loads.

• Also separate from minor relocation machinery / system of any external energy supply. Before

recommissioning, reconnect the machine to the mains according to regulations.

• When recommissioning, proceed according to the operating instructions..

Safety regulations

• Inspections according to legal and local obligatory regulations regarding accident prevention are

carried out by the manufacturer or by authorised expert personnel. No guarantees whatsoever
are valid for damage caused or favoured by the non-consideration of these directions for use.

Summary of Contents for LW 320 E MC






























































































































































































































Search results

Summary of Contents for LW 320 E MC

Reviews:

Related manuals for LW 320 E MC

Brands by name

Popular brands

Lenhardt & Wagner LW 320 E MC, Operating Instructions Manual

Search results

Summary of Contents for LW 320 E MC

Reviews:

Related manuals for LW 320 E MC

Brands by name

Popular brands