Lenhardt & Wagner LW 320 E MC, Operating Instructions Manual

Page: 88 / 221

ECC - Electronic compressor control Page B - 10
B
Settings Menu (M300)
Pushing key 3 in the Selection Menu leads to the Settings Menu.
Settings:
Automatic
2 Stop pressure
Key 2 leads to submenu „Set Stop Pressure”
3 Restart Press.
Key 3 leads to submenu „Set Restart Pressure”
Semi-Automatic
4 Stop Pressure
Key 4 leads to submenu „Set Stop Pressure”
9 Close
Key 9 leads back to submenu "Selection"
(M300) Return : #
Key # leads back to “Main Menu”
Use menu M700 to change between “Automatic” and “Semi-Automatic” mode.
Restart pressure can only be set in “Automatic Mode”.
Prior to setting the pressure, start the safety valve test.
Attention during maintenance
During automatic mode, the compressor can automatically start by itself at any time,
depending on the selected restart pressure (see "Set Restart Pressure" M330).
!
O P E R A T I O N A N D F U N C T I O N
Version: 271012-001 E