88051850 04/12
60 GALLON COMPRESSOR
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
CAUTION:
FOR YOUR OWN SAFETY READ
INSTRUCTION MANUAL
COMPLETELY AND CAREFULLY
BEFORE OPERATING THIS
COMPRESSOR.
Failure to follow all instructions
as listed below may result in
electrical shock, fire, and/or
serious personal injury.
Breathable Air Warning:
This compressor/pump is not
equipped and should not be
used “as is” to supply
breathing quality air. For any
application of air for human
consumption, the air
compressor/pump will need
to be fitted with suitable in-
line safety and alarm
equipment. This additional
equipment is necessary to
properly filter and purify the
air to meet minimal
specifications for Grade D
breathing as described in
Compressed Gas Association
Commodity Specification G
7.1 - 1966, OSHA 29 CFR
1910. 134, and/or Canadian
Standards Associations
(CSA).
SPECIFICATIONS:
Tank Size:
60 gallons
CFM:
11.5 @ 40PSI;
10.2 @ 90 PSI
Horsepower (Running):
3HP
Max Pressure:
135 PSI
Thermal overload protection
ASSEMBLY
INSTRUCTIONS
Do not operate the
compressor without lubricant
or with low lubricant levels. It
could cause damage to the
compressor.
1) Check the oil level. Add
additional oil if needed. If
using for the first time, pour
supplied oil into oil tank until
the oil reaches the red dot on
the oil level sight glass. Do
not over fill.
2) Install oil fill plug before
starting.
3) Close the tank valve on the
bottom of the air tank by
turning the valve clockwise.
4) A shut off valve (ideally
¾
”
) should be installed on the
discharge port of the tank.
Use Teflon tape on the
threads to ensure an airtight
connection between the tank
and the plumbing or hose
coupler. Do not over tighten
the fittings.
Model: 51850, 52332
