Bottom Bracket Removal/Adjustment:
8-mm hex key – crank bolts
Crank
Puller
Lock Ring Wrench –lock ring on left bearing cup
Bottom Bracket Socket (Shimano
®
-compatible cartridge style) + ½” drive
Locktite
®
242 (United States)
or
Locktite
®
243 (International) – Medium strength
(blue)
Rubber Mallet/ Dead-blow hammer – used to check for spindle radial end play
Torque wrench – for crank bolts, right bearing cup, & lock ring
Flywheel
Assembly:
4-mm hex key – flywheel pulley mounting screw
5-mm hex key - pillow block bearing mounting bolt
*Flywheel pulley puller – flywheel pulley
Custom-made tool – the pulley is pressed onto the spline shaft
*Flat base pry bar/lever – pillow block bearing
MPatzer Page
3 7/8/2002
