9
kage area!
•
When operating the external lift controls for the three-point linkage, do not
stand between the tractor and implement!
•
Always ensure sufficient lateral limitation for the three-point linkage of the
tractor in the transport position of the implement!
•
When driving on roads with the implement raised, the raise/lower control
must be locked to prevent lowering!
Hydraulic equipment
•
The hydraulic pipes are under pressure!
•
When connecting hydraulic rams, the pipes must be connected as direc-
ted!
•
Always release hydraulic pressure from both tractor and implement before
coupling!
•
When connecting hydraulic pipes to the tractor ensure that incorrect use is
avoided. If the connections are reversed, the opposite function is carried
out (e.g. raising/lowering) and there is a risk of accidents!
•
Regularly check the hydraulic pipes and replace them in the event of da-
mage or signs of ageing. The replacement pipes must comply with the
technical specification as laid down by Lemken!
•
When searching for leaks appropriate equipment should be used because
of the danger of injury!
•
Hydraulic oil escaping at high pressure can penetrate the skin and cause
serious injury! When injured see a doctor immediately! Danger of infection!
•
Before working on any hydraulic equipment - lower all implements/attach-
ments, release hydraulic pressure where possible and switch off the trac-
tor engine!
Tyres
•
When working on the tyres make sure that the implement has been placed
on the ground safely and that it is secured by chocks against unintentional
Summary of Contents for Thorit 9 K
