20
5.3
Height adjustment of the
drawbar
The drawbar (A0) can be set in two
height positions. Usually the top po-
sition should be chosen to reach a
better entry of the cultivator and a
better reconsolidation effect of the
rollers.
The lower position should be cho-
sen, when the roller will be loaded
with too much pressure and cloggs
due to the high pressure load.
5.4
Re-positioning the drawbar
It it is required to change the height position of the drawbar, the bolts (A5)
must be loosened, the drawbar plates (A4) with drawbar turned by 180° and
then fitted again. The nuts of the bolts must be tightened with a torque of 580
Nm and secured with Loctite.
Summary of Contents for Thorit 9 K
