LEMKEN Thorit 9 K, Operating Instructions Manual

Page: 31 / 49

29
8.7 Depth wheels
As accessory depth wheels (J0)
are available.
They prevent that the outer tines
work too deep.
They should not be loaded with
too much weight of the cultivator.
The depth will be adjusted by me-
ans of the pin adjuster (V2) and
the eccentric lever (J1). Before
dismounting the pin (J2), it must
be unloaded by means of the ec-
centric lever (J1). Therefore the
eccentric lever will be fitted to one
of the holes (J3) of the wheel stalk
(J4) directly above the bracket
(J5), secured and pressed down.
WARNING! The weel stalk (J4) must always be held by the eccentric lever
(J1) or the pin (J2)! Never dismount eccentric lever and pin at
the same time!
After each depth adjustment the pin (J2) must be secured again.
•
Read and adhere to the General Safety Instructions as well
as to the Instructions „Hydraulic assembly“, „Tyres“ and
„Maintenance“!