DTV -
Headend
| MLF-101
Manual
© 2020 Lemco. All rights reserved.
22
4.2.13 - “LAN” page
At “LAN” page (Figure No 17) the user is able to setup all the parameters of the LAN control of the device as follows:
•
DHCP – Enable or disable DHCP
•
IP address: Set a static IP address for controlling the device
•
Subnet mask: Set the specific Subnet mask
•
Gateway: Set the gateway’s IP address
•
Primary DNS: Set the IP address of the primary DNS
•
Secondary DNS: Set the IP address of the secondary DNS
•
Port: Assign the control port
•
MAC address: Depicts the MAC address of the LAN control
•
Figure No 17
