DTV -
Headend
| MLF-101
Manual
© 2020 Lemco. All rights reserved.
12
Setup
4.2.4 - “Input” page
At the “Input” page (Figure No 4) the user is able to select the working mode for each input.
There are four tabs, one for each input. The user is able to select the working mode of each input as follows:
For Satellite signal reception the user must select DVB-S/S2/S2X mode:
1. Tuner Enabled/Disabled - Enable or disable the specific tuner
2. SAT or IF frequency – Select how to insert the SAT frequency
3. Symbol rate – Insert the symbol rate
4. LNB voltage – Select the LNB voltage (13V,18V, OFF)
5. Band – Select the appropriate SAT band (works only if IF frequency is selected as input method)
6. DiSEqC – Select DiSEqC A, B, C, D
7. PLS – Enter the PLS number of the stream
•
Figure No 4