DTV -
Headend
| MLF-101
Manual
© 2020 Lemco. All rights reserved.
19
The status section in (Figure No 12) provides a general idea to the user of the current payload (according to the
selected programs) comparing to the max. output payload.
It is recommended that the user must not exceed the 85% from each output, since all the bitrate are variable
according to their specific content.
4.2.9 - “TS settings” page
At this section (Figure 13), the user is able to setup all the TS settings of the four multiplexes at device’s output.
For each multiplex output the user can setup the following settings:
TS ID:
Which is the ID No of the specific multiplex (1…65535)
Net ID:
Which is the Net ID No of the specific multiplex (1…65535)
Original Net ID: Which is the Org. Net ID No of the specific multiplex (1…65535)
Network Name: Which is the network name of the specific multiplex
NIT:
Select from Global, Default and Custom options
NIT version:
Select the NIT version
Global NIT:
Select the input source of Global NIT. In this case NIT will be the same for all outputs.
LCN provider:
Choose the appropriate LCN provider (EACEM, ITC, Nordig, APN)
•
Figure No 12
•
Figure No 13